当前位置: 首页- 新闻资讯

铝板5种上淬火状态-F、O、H、T、W的介绍

来源://www.renttoplux.com/发布时间:2024-01-22

铝板的基本上状态可分成F、O、H、T、W,这五种状态代表了铝板的五种工艺处理和环节,不一样状态的铝板性能和价位也会有非常大差别。

The basic states of aluminum plates can be divided into F, O, H, T, and W. These five states represent the five process treatments and links of aluminum plates, and the performance and price of aluminum plates in different states will also vary greatly.

铝板5种基本上淬火状态-F、O、H、T、

Five basic quenching states of aluminum plate - F, O, H, T

铝板5种基本上淬火状态-F、O、H、T、

Five basic quenching states of aluminum plate - F, O, H, T

态铝板

State aluminum plate

状态又被称为随意生产加工状态,F态铝板的机械设备有机化学性能并没有明文规定,购置F状态铝板的顾客一般对铝板的性能有特别要求。购置后,她们将开展需要的生产加工、硬底化和热处理工艺,以获取所需要的结构力学和有机化学性能。

20230531034346643.jpg

The state is also known as the state of arbitrary production and processing. The organic chemical properties of mechanical equipment for F-state aluminum plates are not explicitly specified, and customers who purchase F-state aluminum plates generally have special requirements for the performance of the aluminum plates. After purchase, they will carry out the necessary production processing, hardening and heat treatment processes to obtain the required structural mechanics and organic chemical properties.

态铝板

State aluminum plate

状态又被称为大部分淬火状态,O并没有细分化状态,就是指仅有大部分淬火才可以得到zui少抗压强度的铝板商品。

The state is also known as the majority quenching state, and O does not have a finely differentiated state, which means that only the majority quenching can obtain aluminum plate products with low compressive strength.

态铝板

State aluminum plate

状态又被称为冷作硬化状态,代表加工硬化后抗压强度提升的铝板。H状态有很多细分化状态,如H18态,1和8,di一个数据代表工艺处理:1是冷作硬化,2是生产后不大部分淬火,3是生产后超低温淬火;第二个数据代表强度:1-8,1,8。

The state, also known as cold work hardening state, represents the aluminum plate with improved compressive strength after work hardening. There are many finely differentiated states in the H state, such as H18 state, 1 and 8, where di represents process processing: 1) cold work hardening, 2) minimal quenching after production, and 3) ultra-low temperature quenching after production; The second data represents intensity: 1-8, 1, 8.

态铝板

State aluminum plate

状态就是指铝板的热处理工艺状态,表明铝板冷作硬化后平稳。T状态有细分化状态,代表不一样的工艺处理,状态从T0一直到T10。T态中,Tx51代表清除热应力,如T6状态,清除热应力后,表明为T651。

The state refers to the heat treatment process state of the aluminum plate, indicating that the aluminum plate is stable after cold work hardening. The T state has a finely differentiated state, representing different process treatments, from T0 to T10. In the T-state, Tx51 represents the removal of thermal stress. For example, in the T6 state, after the removal of thermal stress, it indicates T651.

态铝板

State aluminum plate

状态就是指热处理回火热处理工艺状态,W状态不稳定,表明铝板热处理回火后处在常温下的当然时效性,W状态只代表着铝板处在当然时效性环节。

The state refers to the state of the heat treatment and tempering process. The unstable W state indicates that the aluminum plate is in the natural aging stage at room temperature after heat treatment and tempering. The W state only represents that the aluminum plate is in the natural aging stage.

本文由铝板生产厂家提供技术支持,更多的详细精彩内容请点击我们的网站//www.renttoplux.com我们将会全心全意为您提供满意的服务。

This article is supported by aluminum plate manufacturers. For more detailed and exciting content, please click on our website //www.renttoplux.com We will wholeheartedly provide you with satisfactory service.

Baidu
map